Skip to content

Tests at course level

Here you get an overview of how to further configure a test in a course, how to make manual evaluations and how to save the results.

Test Configuration at Course Level

Open the course, go to the course editor and add a course element "Test" or select an already added course element Test. You will now see the following tabs:

Test Tabs Kursebene

Die Tabs "Titel und Beschreibung" sowie "Layout" sind bei allen Kursbausteinen gleich.

Tab Learning path

As with all learning path courses, you can define here whether the course element is mandatory for the learning path course or whether it should not be used for the learning path display (setting "voluntary"), from when the test will be visible, until when processing is possible and what processing time can be expected for this element. In addition, the following completion criteria are available:

Test Completion criteria

Tab Test configuration

Here you select or create the test you want to use. Subsequently, further settings can be made, e.g. the type of correction or the type of display of the test results can be defined. In detail, the following settings are possible:

Section Test

Bewertung mit Einstufung/Noten Wählen Sie eine der vorgegebenen Bewertungsskalen z.B. Noten, Niveaustufen oder Emojis aus. Sie können anschließend die Punkte Untergrenze auch noch anpassen. Entscheiden Sie auch ob die Stufenzuordnung automatisch für den User sichtbar sein soll oder ob die Zuordnung manuell durch den Betreuer bereitgestellt werden soll.

Ignore in course assessment : If the check mark is set here, the test is not taken into account when calculating progress in a learning path course. This setting is not available for a conventional course.

Set assessment period : The test can be started during the test period. As soon as the "to" time is reached, the test is automatically terminated. This is also the case if the defined test time has not yet been used up.

Section Correction

Correction : The correction can be made automatically or manually. As soon as a question type to be evaluated manually, e.g. free text, is available, it is mandatory to select a manual variant. For the auto correction the result is visible right away and all questions are revised automatically.

For the manual correction the visibility of the result is limited and the the coach needs to add manual correction, as for some question types no auto correction is possible. These include essay, file upload and drawing. A manual correction is also possible, if the just named question types are not included in the test. Like this it becomes possible to limit the visibility, even though the test consists only of multiple choice questions.

By selecting the option "Manual by external graders", OpenOlat users can also correct a test without being a member or even coach of the course. This option also activates the tab "Graders" and you can see who is assigned to the test as corrector.

Test Tab Graders

Info

If the option "Manual by external graders" is not available, no external correctors were configured in the learning resource Test.

Release assessment : Set here whether the results are released by default or not.

  • Not released: The test score is not released by default and cannot be viewed by the participant.
  • Released: The assessment is released by default and can be viewed by the participant.

Section Report

Show score on test homepage : If this option is selected, the score will be shown to the user on the test homepage.

Show results on test homepage : Here it can be defined, if the result should be shown on the test homepage.

Test report setting

If the checkbox Depending on date is not selected, the results are available directly after finishing the test. If only the from date is inserted, the result is shown from this time on. If both dates are inserted, the result is available during this time period.

In wich level of detail the results are shown, can be defined under "Overview results". The selection can be done once and is the same for "Show results on test homepage" and "Show results after test has been submitted".

Show results after test has been submitted : Here you configure which information the learners receive:

Options results display

The test summary shows, among other things, the percentage achieved, the time taken to complete the test, the number of questions worked on and the score achieved, as well as the status. The section summary is only relevant if a test also contains sections. In the question summary, the title of the question, the points achieved in each case or the matching percentage value are displayed but not the question itself. In the answer of the participants the question, all answer options as well as the choice of the user is shown, but no evaluation whether the question was answered correctly or incorrectly. If this is desired, the option must be combined with other feedback options.

Depending on the combination of the display options, different types of feedback can be left for the user.

Tab Options

If you include a test in a course, the settings from the configuration of the learning resource Test (see "Test settings" and "Configure test") will be adopted by default. Therefore, "Use configuration of the learning resource" is selected in the "Options" tab and the corresponding settings made in the learning resource Test are displayed here.

If the configuration needs to be adapted, "Adjust configuration" needs to be selected. These adaptions do not have any impact on the configuration of the learning resource itself. In the tab Test configuration some additional configuration can be made.

Tab "Kommunikation"

Hier kann eingestellt werden ob während der Durchführung des Tests Teilnehmende live Anfragen per Chat an die Kurs Betreuer bzw. Besitzer senden dürfen. Das macht natürlich nur dann Sinn, wenn während eines definierten Test-Zeitraums auch reale betreuende Personen die Testdurchführung beobachten.

Tab HighScore

A highscore overview for the test can also be activated and further configured here.

Highscore settings

Tab "Korrektoren"

Es erscheint eine Übersicht der Korrektoren sowie weitere Informationen. Per Link zur Lernressource des Tests können Änderungen vorgenommen werden.

Email Bestätigung ( Release 17.2. )

Aktivieren Sie die Email Bestätigung, wenn Sie die Abgabe des Testes per Email bestätigen wollen. Sie können in dem Mailtext auf verschiedene Variablen wie Name oder Punktezahl zurückgreifen. Eine Kopie der Mail kann auch an die Kursbesitzer, zuständige Betreuer oder externe Mail-Adressen verschickt werden.

Für den Mailtext kann die Vorlage und ein voreingestellter Betreff mit dem Titel des Test-Kursbausteins im Betreff verwendet werden. Alternativ können die Vorlage und der Betreff auch geändert werden. Wählen Sie in diesem Fall bei "Vorlage" -> "Eigener Text" um den Mailingtext zu bearbeiten oder komplett zu ändern.

Weitere Informationen zur Verwendung von Variablen in Mailing-Texten finden Sie hier.

Tab "Erinnerungen"

Hier können Einnerungsmails nach bestimmten Kriterien konfiguriert werden. Weitere Informationen zum Versand von Erinnerungen erhalten Sie hier.

Comparison: Test and Self-test

Feature Test Test Selbsttest Selftest
Intended use Examination test, test with the possibility of examination by the teacher, normal test Exercise, self-evaluation
Created with Test editor QTI 2.1 Test editor QTI 2.1
Question types QTI 2.1 all question types possible All question types possible, but only automatically scorable question types can also be used for points.
Embedding with course element Test Self-test
Results appear in the assessment tool and in the test statistics and are visible for coaches appaer not in the assessment tool and in the test statistics and are thus not visible for coaches and owners
Archiving of results yes, personalized yes, anonymized - however, a personal correlation or feedbacks are not possible

Tipp

Sometimes it makes sense to use the type "test" even if you actually want to provide the learners with a self-test, because with tests you have the possibility to support the learners individually if necessary and also to provide feedback on manually assessable question types.

Changes to tests and self-tests

Achtung

As soon as a test or self-test is included in a course, only very limited changes can be made under "Edit content". Therefore, tests should not be included in a course until they are completely finished.

Why is that? Assuming you could add questions to an integrated test or mark other answers as correct, not all test subjects would meet the same requirements. On the other hand, results may already have been saved that cannot be unambiguously assigned to a version of the test file after the change. Therefore the editing of already integrated tests and self-tests is strongly restricted.

For example, if you want to add a new question to a test or if an answer was incorrectly marked as correct, copy the learning resource Test in the Author Area and save the test again. Edit and correct the test and then include the test in the course. To do this, switch to the course editor and exchange the file in the course element of the desired test. If results have already been received, they will be archived in your personal folder (private) and you can decide whether OpenOlat should inform the course participants who have already taken the test about the change.

View and grade tests

Access to tests completed by course participants is available in the "Assessment tool". The assessment tool can be found in the "Administration" of the course. All tests and other assessable course elements of a course are displayed under "User" and can be called up, viewed, changed and commented on in relation to a person. Alternatively, the results can also be viewed and managed in the course run with the editor closed. In the course run it is also possible to configure reminders for the respective test and thus trigger a condition-dependent mail dispatch.

Test course run participant list

If external graders have also been activated for a test, they can use the Coaching Tool to make the assessments.

Test results and archiving

Select the link "Data archiving" from the "Administration" in the course view. Go to "Tests" or "Course results" on the left and save the displayed file. The results of self-tests are saved anonymously.

After archiving, you will find all information about who answered which questions, which answers were given and how many points were achieved during the self-test.

Via "Administration" ->"Test Statistics" you can also quickly access the graphical evaluation of your test data.